| LubeOilab
To test Lubricating
Oils ..in minutes... on site
| LUBE OILAB
pioneered by S.S. Engg. is a revolutionary
breakthrough aimed at conserving precious lubricating oils, simultaneously
allowing the operating machines to perform with optimum output and efficiency.
Regular testing
of lubricating oils is essential to :
- Determine the
condition of oil in use.
- Identify and
initiate prompt rectification of machine problems .
- Change oils
based on their condition and not on fixed intervals.
- Check quality
of new oil before use.
|
 |
Applications
- Lube Oilab can
analyse all types of automotive and industrial lubricants such as Engine
Oils, Gear Oils, Hydraullic Oils, Turbine Oils, Compressor Oils etc.
- Allows regular
testing of used and new oils.
- Identifies malfunction
and initiate corrective action.
- Reduces possibilities
of machine failure, damage and malfunction.
- Increases oil
drain period thus preventing excess oil wastage and loss.
Features
- Portable
- Simple to Operate
- Instant results
- Accurate
- Highly Cost
effective
Tests
Lube Oilab incorporates
- a versatile array of gages to conduct the relevent tests for effective
analysis.
| Sampling
Specially designed
Pump which can draw test oil samples directly from the oil sumps or other
sources into the sample bottle upto a height of 10 ft.
|
 |
| Viscosity
A handy Visgage,
determines exact viscosity of the new and used lubricating oils in "Centistokes"
(range 2cSt to 460cSt).
|
 |
| Water Content
A handy Hydrogage
determines exact water content in oils in terms of percentage volume. The
range is 0 - 1.24% or higher.
|
 |
| Total Base Number
By a go-no-go
test, based on titration principle, this TBN test determines whether the
engine oil has minimum Total Base Number (TBN) value or not.
|
 |
| Insolubles &
Dispersancy
The Blotter Test
determines the dispersancy and insolubles in engine oils.
|
 |
Oil Test Kits
: Click On any of the links below for more information
Lube
Oilab - Complete analysis of new & used lubricating oils
Visgage
- To test viscosity of Lubricating Oils
Hydrogage
- To measure water content in Fuels and Oils
F.O.
Gage - To measure Furnace Oils/ LSHS Viscosity
Visgage
(Model-II) - To check Diesel quality
TAN
Gage - To check Total Acid Number
TBN
Gage - To check Total Base Number
|
